HD SERIES      SPECIFICATION SERIVES HD CAPACITY 400 450 500 Centre height over flat       bedways 400 mm 450 mm 500 mm Width of Bed 500 mm 560 mm 560 mm Swing Over Cross Slide 530 mm 650 mm 750 mm Swing Over Saddle 590 mm 725 mm 825 mm Swing Over Bed 800 mm 900 mm 1000 mm Swing IN Gap 1175 mm 1300 mm 1400 mm Width of Gap in Front of       Face Plate 300 mm 300 mm 300 mm     TECHNICAL DATA   A.B.C. 1000 mm to 8000 mm MAIN SPINCLE   Type A2-8 Spindle bore diameter / Taper 104mm / MT-6 Taper in centre adaptor MT-6 SPINDLE SPEEDS   Number/Range (in G.P.) 12 Nos. / 20-600RPM CARRIAGE   Cross Slide Travel 500 600 600 Compound slid travel 250 mm Maximum section of tools 32 mm x 32 mm LEAD SCREW   Diameter / Pitch 50.8 MM / 2 TPI FEED RANGE   Longitudinal (50 Nos) mm/rev 0.078 to 2.34 Cross (50 Nos) mm/rev 0.016 to 0.470 THREADS   mm (19 Nos) Range 1.0 to 30 Inch (42 Nos) Range 1.0 to 30 Module (19 Nos) Range 1.0 to 30 D.P. (48 Nos) 2 to 60 TAIL STOKE   Diameter of Sleeve/bore taper 100 mm / MT-6 Sleeve Travel 250 mm ELECTRICAL   Suppy (AC) 415 V, 3 Ph, 50 Hz Main Motor : Power 5.5 Kw / 7.5 H.P. up to 3500 ABC   7.5 Kw / 10 for 4750 & 6000 ABC Main Motor : Speed 1440 RPM Rapid Travers motor flr saddle 0.75 Kw Coolant 0.18 Kw << Back